×
Bis auf weiteres keine Downloads möglich (05 Mai 2020)

Aus den Erfahrungen der letzten Wochen und dem überstandenen Backdoor-Angriff habe ich eines gelernt: Nämlich ganz sicher keine veralteten Komponenten in der Forensoftware einzusetzen, die keine Sicherheitsupdates mehr erhalten. Daher gibt es bis auf weiters keine Downloadkomponente mehr, und manche Links in manchen älteren Threads gehen ins Leere.

Ich bitte dafür um Verständnis !

Euer Andi

normal Frage A1TV hinter Doppelnat mit pfsense will nicht laufen


Mehr
21 Mär 2020 18:30 #78334 von ChESch7
Hallo miteinander,

habe ein A1-Modem im normalen Multi-User Modus, und meine PfSense-Firewall dahinter läuft als DMZ.
Nun wollte ich mit den Geräten hinter der pfsense auch über VLC-Player fernsehen, bekomme es aber beim besten Willen nicht hin.
Habe bei der PfSense den IGMP-Proxy eingestellt, Firewall-Regeln gemacht, dem Switch (Zyxel GS1900-24HP) IGMP Snooping aktiviert, doch es will einfach nicht.

Habe ich etwas übersehen? Freue mich auf jeden Input!

Danke und LG
ChESch7

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
21 Mär 2020 20:19 #78335 von rwhome
hallo,

klingt soweit ausreichend
wobei ich die pfsense nicht kenne also bei konfigurationsdetails nicht helfen kann

falls es absolut nicht klappen will würde ich einen proxy/iptv server im netz des a1 routers installieren
z.b. udpxy auf einen raspi
oder einen iptv server (tvheadend , tv mosaic ...)
die setzen den multicast stream um in einen http stream
damit hast keine firewall probleme

LG RWHome//Wer glaubt, etwas zu sein, hat aufgehört, etwas zu werden

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
21 Mär 2020 20:48 #78336 von ChESch7
Gibt es Möglichkeiten/Tools zum Troubleshooten? Bin in Netzwerktechnik keine 0, nur mit Multicast hatte ich noch nie zu tun.

Danke einstweilen für den Input!

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
22 Mär 2020 12:00 - 22 Mär 2020 12:22 #78337 von rwhome
was auch immer auf der pfsense selbst als diagnose verfügbar ist
die zwei interfaces für den proxy müssen richtig konfiguriert sein (upstream,downstream)
protokolle igmp,udp in der firewall usw.
ev. pimd verwenden (protocoll independent multicast routing) und alles mal durchlassen
ansonsten die üblichen tools wie wireshark ... filter auf igmp
bild zeigt igmp traffic zwischen a1tv-box und a1 router (wenn ich mich richtig erinnere)

LG RWHome//Wer glaubt, etwas zu sein, hat aufgehört, etwas zu werden

Dieser Beitrag enthält einen Bildanhang.
Bitte anmelden (oder registrieren) um ihn zu sehen.

Letzte Änderung: 22 Mär 2020 12:22 von rwhome.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
23 Mär 2020 11:22 #78343 von ChESch7
Welche Netzwerke gehören bei Upstream/Downstream eingetragen? Stimmt das so?

Ich habe nun meine Switches im Netzwerk mit diesem Tool getestet: github.com/troglobit/mtools
Da kommen die Pakete alle an. A1TV funktioniert leider nach wie vor nicht...

Mir gehen schön langsam die Ideen aus, was es noch haben könnte...

Dieser Beitrag enthält einen Bildanhang.
Bitte anmelden (oder registrieren) um ihn zu sehen.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
23 Mär 2020 11:51 #78344 von ChESch7
Ok, habe jetzt festgestellt, das bei pfSense anscheinend der IGMP-Proxy nicht gelaufen ist... Habe jetzt einiges probiert, hier ein Auszug aus dem Debug:
Searching for config file at '/var/etc/igmpproxy.conf'
Config: Quick leave mode enabled.
Config: Got a phyint token.
Config: IF: Config for interface em0.
Config: IF: Got upstream token.
Config: IF: Got ratelimit token '0'.
Config: IF: Got threshold token '2'.
Config: IF: Got altnet token 10.0.0.0/8.
Config: IF: Altnet: Parsed altnet to 10/8.
Config: IF: Got altnet token 224.0.0.0/4.
Config: IF: Altnet: Parsed altnet to 224/4.
Config: IF: Got altnet token 239.0.0.0/4.
Config: IF: Altnet: Parsed altnet to 239/4.
Config: IF: Got altnet token 213.0.0.0/4.
Config: IF: Altnet: Parsed altnet to 213/4.
IF name : em0
Next ptr : 0
Ratelimit : 0
Threshold : 2
State : 1
Allowednet ptr : e25000
Config: Got a phyint token.
Config: IF: Config for interface em1.
Config: IF: Got downstream token.
Config: IF: Got ratelimit token '0'.
Config: IF: Got threshold token '1'.
Config: IF: Got altnet token 10.10.0.0/24.
Config: IF: Altnet: Parsed altnet to 10.10.0/24.
IF name : em1
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 2
Allowednet ptr : e25040
Config: Got a phyint token.
Config: IF: Config for interface em1.100.
Config: IF: Got disabled token.
IF name : em1.100
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 0
Allowednet ptr : 0
buildIfVc: Interface em0 Addr: 10.0.0.200, Flags: 0xffff8843, Network: 10.0.0/24
buildIfVc: Interface em1 Addr: 10.10.0.1, Flags: 0xffff8843, Network: 10.10.0/24
buildIfVc: Interface lo0 Addr: 127.0.0.1, Flags: 0xffff8049, Network: 127/8
buildIfVc: Interface em1.100 Addr: 172.19.0.1, Flags: 0xffff8843, Network: 172.19.0/24
buildIfVc: Interface ovpns1 Addr: 10.45.68.1, Flags: 0xffff8051, Network: 10.45.68/24
Found config for em0
Found config for em1
Found config for em1.100
Found upstrem IF #0, will assing as upstream Vif 2
adding VIF, Ix 0 Fl 0x0 IP 0xc800000a em0, Threshold: 2, Ratelimit: 0
        Network for [em0] : 10.0.0/24
        Network for [em0] : 10/8
        Network for [em0] : 224/4
        Network for [em0] : 239/4
        Network for [em0] : 213/4
adding VIF, Ix 1 Fl 0x0 IP 0x01000a0a em1, Threshold: 1, Ratelimit: 0
        Network for [em1] : 10.10.0/24
        Network for [em1] : 10.10.0/24
Got 262144 byte buffer size in 0 iterations
Joining all-routers group 224.0.0.2 on vif 10.10.0.1
joinMcGroup: 224.0.0.2 on em1
Joining all igmpv3 multicast routers group 224.0.0.22 on vif 10.10.0.1
joinMcGroup: 224.0.0.22 on em1
SENT Membership query   from 10.10.0.1       to 224.0.0.1
Sent membership query from 10.10.0.1 to 224.0.0.1. Delay: 10
Created timeout 1 (#0) - delay 10 secs
(Id:1, Time:10) 
Created timeout 2 (#1) - delay 21 secs
(Id:1, Time:10) 
(Id:2, Time:21) 
RECV V2 member report   from 10.10.0.1       to 224.0.0.2
The IGMP message was from myself. Ignoring.
RECV V2 member report   from 10.10.0.1       to 224.0.0.22
The IGMP message was from myself. Ignoring.
RECV Membership query   from 10.10.0.1       to 224.0.0.1
The IGMP message was local multicast. Ignoring.
RECV V2 member report   from 10.10.0.143     to 233.89.188.1
Should insert group 233.89.188.1 (from: 10.10.0.143) to route table. Vif Ix : 1
No existing route for 233.89.188.1. Create new.
No routes in table. Insert at beginning.
Inserted route table entry for 233.89.188.1 on VIF #1
Joining group 233.89.188.1 upstream on IF address 10.0.0.200
joinMcGroup: 233.89.188.1 on em0

Current routing table (Insert Route):
-----------------------------------------------------
#0: Dst: 233.89.188.1, Age:2, St: I, OutVifs: 0x00000002
-----------------------------------------------------
RECV V2 member report   from 10.0.0.200      to 233.89.188.1
The IGMP message was from myself. Ignoring.
RECV V2 member report   from 10.10.0.145     to 239.254.127.63
Should insert group 239.254.127.63 (from: 10.10.0.145) to route table. Vif Ix : 1
No existing route for 239.254.127.63. Create new.
Found existing routes. Find insert location.
Inserting after route 233.89.188.1
Inserted route table entry for 239.254.127.63 on VIF #1
Joining group 239.254.127.63 upstream on IF address 10.0.0.200
joinMcGroup: 239.254.127.63 on em0

Current routing table (Insert Route):
-----------------------------------------------------
#0: Dst: 233.89.188.1, Age:2, St: I, OutVifs: 0x00000002
#1: Dst: 239.254.127.63, Age:2, St: I, OutVifs: 0x00000002
-----------------------------------------------------
RECV V2 member report   from 10.0.0.200      to 239.254.127.63
The IGMP message was from myself. Ignoring.
Route activate request from 10.10.0.49 to 224.0.1.187 on VIF[0]
No table entry for 224.0.1.187 [From: 10.10.0.49]. Inserting route.
No existing route for 224.0.1.187. Create new.
Found existing routes. Find insert location.
Inserting after route 239.254.127.63
Inserted route table entry for 224.0.1.187 on VIF #-1
No downstream listeners for group 224.0.1.187. No join sent.

Current routing table (Insert Route):
-----------------------------------------------------
#0: Dst: 233.89.188.1, Age:2, St: I, OutVifs: 0x00000002
#1: Dst: 239.254.127.63, Age:2, St: I, OutVifs: 0x00000002
#2: Dst: 224.0.1.187, Age:2, St: I, OutVifs: 0x00000000
-----------------------------------------------------

Current routing table (Activate Route):
-----------------------------------------------------
#0: Dst: 233.89.188.1, Age:2, St: I, OutVifs: 0x00000002
#1: Dst: 239.254.127.63, Age:2, St: I, OutVifs: 0x00000002
#2: Src0: 10.10.0.49, Dst: 224.0.1.187, Age:2, St: A, OutVifs: 0x00000000
-----------------------------------------------------
RECV V2 member report   from 10.10.0.1       to 224.0.0.22
The IGMP message was from myself. Ignoring.
RECV V2 member report   from 10.10.0.130     to 224.0.2.3
Should insert group 224.0.2.3 (from: 10.10.0.130) to route table. Vif Ix : 1
No existing route for 224.0.2.3. Create new.
Found existing routes. Find insert location.
Inserting after route 233.89.188.1
Inserted route table entry for 224.0.2.3 on VIF #1
Joining group 224.0.2.3 upstream on IF address 10.0.0.200
joinMcGroup: 224.0.2.3 on em0

Current routing table (Insert Route):
-----------------------------------------------------
#0: Dst: 233.89.188.1, Age:2, St: I, OutVifs: 0x00000002
#1: Dst: 224.0.2.3, Age:2, St: I, OutVifs: 0x00000002
#2: Dst: 239.254.127.63, Age:2, St: I, OutVifs: 0x00000002
#3: Src0: 10.10.0.49, Dst: 224.0.1.187, Age:2, St: A, OutVifs: 0x00000000
-----------------------------------------------------
RECV V2 member report   from 10.0.0.200      to 224.0.2.3
The IGMP message was from myself. Ignoring.
RECV V2 member report   from 10.10.0.1       to 224.0.0.2
The IGMP message was from myself. Ignoring.
About to call timeout 1 (#0)
Aging routes in table.

Current routing table (Age active routes):
-----------------------------------------------------
#0: Dst: 233.89.188.1, Age:1, St: I, OutVifs: 0x00000002
#1: Dst: 224.0.2.3, Age:1, St: I, OutVifs: 0x00000002
#2: Dst: 239.254.127.63, Age:1, St: I, OutVifs: 0x00000002
#3: Src0: 10.10.0.49, Dst: 224.0.1.187, Age:1, St: A, OutVifs: 0x00000000
-----------------------------------------------------
About to call timeout 2 (#0)
SENT Membership query   from 10.10.0.1       to 224.0.0.1
Sent membership query from 10.10.0.1 to 224.0.0.1. Delay: 10
Created timeout 3 (#0) - delay 10 secs
(Id:3, Time:10) 
Created timeout 4 (#1) - delay 21 secs
(Id:3, Time:10) 
(Id:4, Time:21) 
RECV Membership query   from 10.10.0.1       to 224.0.0.1
RECV V2 member report   from 10.10.0.162     to 233.89.188.1
Should insert group 233.89.188.1 (from: 10.10.0.162) to route table. Vif Ix : 1
Updated route entry for 233.89.188.1 on VIF #1

Current routing table (Insert Route):
-----------------------------------------------------
#0: Dst: 233.89.188.1, Age:1, St: I, OutVifs: 0x00000002
#1: Dst: 224.0.2.3, Age:1, St: I, OutVifs: 0x00000002
#2: Dst: 239.254.127.63, Age:1, St: I, OutVifs: 0x00000002
#3: Src0: 10.10.0.49, Dst: 224.0.1.187, Age:1, St: A, OutVifs: 0x00000000
-----------------------------------------------------
RECV V2 member report   from 10.10.0.144     to 239.254.127.63
Should insert group 239.254.127.63 (from: 10.10.0.144) to route table. Vif Ix : 1
Updated route entry for 239.254.127.63 on VIF #1

Current routing table (Insert Route):
-----------------------------------------------------
#0: Dst: 233.89.188.1, Age:1, St: I, OutVifs: 0x00000002
#1: Dst: 224.0.2.3, Age:1, St: I, OutVifs: 0x00000002
#2: Dst: 239.254.127.63, Age:1, St: I, OutVifs: 0x00000002
#3: Src0: 10.10.0.49, Dst: 224.0.1.187, Age:1, St: A, OutVifs: 0x00000000
-----------------------------------------------------
The IGMP message was local multicast. Ignoring.
RECV V2 member report   from 10.10.0.1       to 224.0.0.22
The IGMP message was from myself. Ignoring.
RECV V2 member report   from 10.10.0.130     to 224.0.2.3
Should insert group 224.0.2.3 (from: 10.10.0.130) to route table. Vif Ix : 1
Updated route entry for 224.0.2.3 on VIF #1

Current routing table (Insert Route):
-----------------------------------------------------
#0: Dst: 233.89.188.1, Age:1, St: I, OutVifs: 0x00000002
#1: Dst: 224.0.2.3, Age:1, St: I, OutVifs: 0x00000002
#2: Dst: 239.254.127.63, Age:1, St: I, OutVifs: 0x00000002
#3: Src0: 10.10.0.49, Dst: 224.0.1.187, Age:1, St: A, OutVifs: 0x00000000
-----------------------------------------------------
About to call timeout 3 (#0)
Aging routes in table.
Removing group 224.0.1.187. Died of old age.
Removed route entry for 224.0.1.187 from table.
Vif bits : 0x00000000
Removing MFC: 10.10.0.49 -> 224.0.1.187, InpVIf: 0
MRT_DEL_MFC; Errno(49): Can't assign requested address

Current routing table (Remove route):
-----------------------------------------------------
#0: Dst: 233.89.188.1, Age:2, St: I, OutVifs: 0x00000002
#1: Dst: 224.0.2.3, Age:2, St: I, OutVifs: 0x00000002
#2: Dst: 239.254.127.63, Age:2, St: I, OutVifs: 0x00000002
-----------------------------------------------------

Current routing table (Age active routes):
-----------------------------------------------------
#0: Dst: 233.89.188.1, Age:2, St: I, OutVifs: 0x00000002
#1: Dst: 224.0.2.3, Age:2, St: I, OutVifs: 0x00000002
#2: Dst: 239.254.127.63, Age:2, St: I, OutVifs: 0x00000002
-----------------------------------------------------
RECV V2 member report   from 10.10.0.49      to 224.0.1.187
Should insert group 224.0.1.187 (from: 10.10.0.49) to route table. Vif Ix : 1
No existing route for 224.0.1.187. Create new.
Found existing routes. Find insert location.
Inserting after route 239.254.127.63
Inserted route table entry for 224.0.1.187 on VIF #1
Joining group 224.0.1.187 upstream on IF address 10.0.0.200
joinMcGroup: 224.0.1.187 on em0

Current routing table (Insert Route):
-----------------------------------------------------
#0: Dst: 233.89.188.1, Age:2, St: I, OutVifs: 0x00000002
#1: Dst: 224.0.2.3, Age:2, St: I, OutVifs: 0x00000002
#2: Dst: 239.254.127.63, Age:2, St: I, OutVifs: 0x00000002
#3: Dst: 224.0.1.187, Age:2, St: I, OutVifs: 0x00000002
-----------------------------------------------------
RECV V2 member report   from 10.0.0.200      to 224.0.1.187
The IGMP message was from myself. Ignoring.
Route activate request from 10.10.0.49 to 224.0.1.187 on VIF[0]
Vif bits : 0x00000002
Setting TTL for Vif 1 to 1
Adding MFC: 10.10.0.49 -> 224.0.1.187, InpVIf: 0

Current routing table (Activate Route):
-----------------------------------------------------
#0: Dst: 233.89.188.1, Age:2, St: I, OutVifs: 0x00000002
#1: Dst: 224.0.2.3, Age:2, St: I, OutVifs: 0x00000002
#2: Dst: 239.254.127.63, Age:2, St: I, OutVifs: 0x00000002
#3: Src0: 10.10.0.49, Dst: 224.0.1.187, Age:2, St: A, OutVifs: 0x00000002
-----------------------------------------------------
About to call timeout 4 (#0)
SENT Membership query   from 10.10.0.1       to 224.0.0.1
Sent membership query from 10.10.0.1 to 224.0.0.1. Delay: 10
Created timeout 5 (#0) - delay 10 secs
(Id:5, Time:10) 
Created timeout 6 (#1) - delay 115 secs
(Id:5, Time:10) 
(Id:6, Time:115) 
RECV Membership query   from 10.10.0.1       to 224.0.0.1
RECV V2 member report   from 10.10.0.1       to 224.0.0.2
The IGMP message was from myself. Ignoring.
RECV V2 member report   from 10.10.0.143     to 239.254.127.63
Should insert group 239.254.127.63 (from: 10.10.0.143) to route table. Vif Ix : 1
Updated route entry for 239.254.127.63 on VIF #1

Current routing table (Insert Route):
-----------------------------------------------------
#0: Dst: 233.89.188.1, Age:2, St: I, OutVifs: 0x00000002
#1: Dst: 224.0.2.3, Age:2, St: I, OutVifs: 0x00000002
#2: Dst: 239.254.127.63, Age:2, St: I, OutVifs: 0x00000002
#3: Src0: 10.10.0.49, Dst: 224.0.1.187, Age:2, St: A, OutVifs: 0x00000002
-----------------------------------------------------
The IGMP message was local multicast. Ignoring.
RECV V2 member report   from 10.10.0.145     to 233.89.188.1
Should insert group 233.89.188.1 (from: 10.10.0.145) to route table. Vif Ix : 1
Updated route entry for 233.89.188.1 on VIF #1

Current routing table (Insert Route):
-----------------------------------------------------
#0: Dst: 233.89.188.1, Age:2, St: I, OutVifs: 0x00000002
#1: Dst: 224.0.2.3, Age:2, St: I, OutVifs: 0x00000002
#2: Dst: 239.254.127.63, Age:2, St: I, OutVifs: 0x00000002
#3: Src0: 10.10.0.49, Dst: 224.0.1.187, Age:2, St: A, OutVifs: 0x00000002
-----------------------------------------------------
RECV V3 member report   from 10.10.0.57      to 224.0.0.22
Should insert group 239.2.16.5 (from: 10.10.0.57) to route table. Vif Ix : 1
No existing route for 239.2.16.5. Create new.
Found existing routes. Find insert location.
Inserting after route 224.0.2.3
Inserted route table entry for 239.2.16.5 on VIF #1
Joining group 239.2.16.5 upstream on IF address 10.0.0.200
joinMcGroup: 239.2.16.5 on em0

Current routing table (Insert Route):
-----------------------------------------------------
#0: Dst: 233.89.188.1, Age:2, St: I, OutVifs: 0x00000002
#1: Dst: 224.0.2.3, Age:2, St: I, OutVifs: 0x00000002
#2: Dst: 239.2.16.5, Age:2, St: I, OutVifs: 0x00000002
#3: Dst: 239.254.127.63, Age:2, St: I, OutVifs: 0x00000002
#4: Src0: 10.10.0.49, Dst: 224.0.1.187, Age:2, St: A, OutVifs: 0x00000002
-----------------------------------------------------
RECV V2 member report   from 10.0.0.200      to 239.2.16.5
The IGMP message was from myself. Ignoring.
Route activate request from 213.33.32.33 to 239.2.16.5 on VIF[0]
Vif bits : 0x00000002
Setting TTL for Vif 1 to 1
Adding MFC: 213.33.32.33 -> 239.2.16.5, InpVIf: 0

Current routing table (Activate Route):
-----------------------------------------------------
#0: Dst: 233.89.188.1, Age:2, St: I, OutVifs: 0x00000002
#1: Dst: 224.0.2.3, Age:2, St: I, OutVifs: 0x00000002
#2: Src0: 213.33.32.33, Dst: 239.2.16.5, Age:2, St: A, OutVifs: 0x00000002
#3: Dst: 239.254.127.63, Age:2, St: I, OutVifs: 0x00000002
#4: Src0: 10.10.0.49, Dst: 224.0.1.187, Age:2, St: A, OutVifs: 0x00000002
-----------------------------------------------------
RECV V3 member report   from 10.10.0.57      to 224.0.0.22
Should insert group 239.2.16.5 (from: 10.10.0.57) to route table. Vif Ix : 1
Updated route entry for 239.2.16.5 on VIF #1
Vif bits : 0x00000002
Setting TTL for Vif 1 to 1
Adding MFC: 213.33.32.33 -> 239.2.16.5, InpVIf: 0

Current routing table (Insert Route):
-----------------------------------------------------
#0: Dst: 233.89.188.1, Age:2, St: I, OutVifs: 0x00000002
#1: Dst: 224.0.2.3, Age:2, St: I, OutVifs: 0x00000002
#2: Src0: 213.33.32.33, Dst: 239.2.16.5, Age:2, St: A, OutVifs: 0x00000002
#3: Dst: 239.254.127.63, Age:2, St: I, OutVifs: 0x00000002
#4: Src0: 10.10.0.49, Dst: 224.0.1.187, Age:2, St: A, OutVifs: 0x00000002
-----------------------------------------------------
RECV V2 member report   from 10.10.0.130     to 224.0.2.3
Should insert group 224.0.2.3 (from: 10.10.0.130) to route table. Vif Ix : 1
Updated route entry for 224.0.2.3 on VIF #1

Current routing table (Insert Route):
-----------------------------------------------------
#0: Dst: 233.89.188.1, Age:2, St: I, OutVifs: 0x00000002
#1: Dst: 224.0.2.3, Age:2, St: I, OutVifs: 0x00000002
#2: Src0: 213.33.32.33, Dst: 239.2.16.5, Age:2, St: A, OutVifs: 0x00000002
#3: Dst: 239.254.127.63, Age:2, St: I, OutVifs: 0x00000002
#4: Src0: 10.10.0.49, Dst: 224.0.1.187, Age:2, St: A, OutVifs: 0x00000002
-----------------------------------------------------
About to call timeout 5 (#0)
Aging routes in table.

Current routing table (Age active routes):
-----------------------------------------------------
#0: Dst: 233.89.188.1, Age:2, St: I, OutVifs: 0x00000002
#1: Dst: 224.0.2.3, Age:2, St: I, OutVifs: 0x00000002
#2: Src0: 213.33.32.33, Dst: 239.2.16.5, Age:2, St: A, OutVifs: 0x00000002
#3: Dst: 239.254.127.63, Age:2, St: I, OutVifs: 0x00000002
#4: Src0: 10.10.0.49, Dst: 224.0.1.187, Age:1, St: A, OutVifs: 0x00000002
-----------------------------------------------------
The IGMP message was local multicast. Ignoring.
RECV V2 member report   from 10.10.0.1       to 224.0.0.22
The IGMP message was from myself. Ignoring.
About to call timeout 6 (#0)
SENT Membership query   from 10.10.0.1       to 224.0.0.1
Sent membership query from 10.10.0.1 to 224.0.0.1. Delay: 10
Created timeout 7 (#0) - delay 10 secs
(Id:7, Time:10) 
Created timeout 8 (#1) - delay 115 secs
(Id:7, Time:10) 
(Id:8, Time:115) 
RECV Membership query   from 10.10.0.1       to 224.0.0.1
RECV V2 member report   from 10.10.0.141     to 233.89.188.1
Should insert group 233.89.188.1 (from: 10.10.0.141) to route table. Vif Ix : 1
Updated route entry for 233.89.188.1 on VIF #1

Current routing table (Insert Route):
-----------------------------------------------------
#0: Dst: 233.89.188.1, Age:2, St: I, OutVifs: 0x00000002
#1: Dst: 224.0.2.3, Age:2, St: I, OutVifs: 0x00000002
#2: Src0: 213.33.32.33, Dst: 239.2.16.5, Age:2, St: A, OutVifs: 0x00000002
#3: Dst: 239.254.127.63, Age:2, St: I, OutVifs: 0x00000002
#4: Src0: 10.10.0.49, Dst: 224.0.1.187, Age:1, St: A, OutVifs: 0x00000002
-----------------------------------------------------
RECV V2 member report   from 10.10.0.130     to 224.0.2.3
Should insert group 224.0.2.3 (from: 10.10.0.130) to route table. Vif Ix : 1
Updated route entry for 224.0.2.3 on VIF #1

Current routing table (Insert Route):
-----------------------------------------------------
#0: Dst: 233.89.188.1, Age:2, St: I, OutVifs: 0x00000002
#1: Dst: 224.0.2.3, Age:2, St: I, OutVifs: 0x00000002
#2: Src0: 213.33.32.33, Dst: 239.2.16.5, Age:2, St: A, OutVifs: 0x00000002
#3: Dst: 239.254.127.63, Age:2, St: I, OutVifs: 0x00000002
#4: Src0: 10.10.0.49, Dst: 224.0.1.187, Age:1, St: A, OutVifs: 0x00000002
-----------------------------------------------------
RECV V2 member report   from 10.10.0.144     to 239.254.127.63
Should insert group 239.254.127.63 (from: 10.10.0.144) to route table. Vif Ix : 1
Updated route entry for 239.254.127.63 on VIF #1

Current routing table (Insert Route):
-----------------------------------------------------
#0: Dst: 233.89.188.1, Age:2, St: I, OutVifs: 0x00000002
#1: Dst: 224.0.2.3, Age:2, St: I, OutVifs: 0x00000002
#2: Src0: 213.33.32.33, Dst: 239.2.16.5, Age:2, St: A, OutVifs: 0x00000002
#3: Dst: 239.254.127.63, Age:2, St: I, OutVifs: 0x00000002
#4: Src0: 10.10.0.49, Dst: 224.0.1.187, Age:1, St: A, OutVifs: 0x00000002
-----------------------------------------------------
RECV V3 member report   from 10.10.0.57      to 224.0.0.22
Got leave message from 10.10.0.57 to 239.2.16.5. Starting last member detection.
counted 1 interfaces
Leaving group 84935407 now
Leaving group 239.2.16.5 upstream on IF address 10.0.0.200
leaveMcGroup: 239.2.16.5 on em0
Interface id 1 is in group $d
SENT Membership query   from 10.10.0.1       to 239.2.16.5
Sent membership query from 10.10.0.1 to 239.2.16.5. Delay: 10
Created timeout 9 (#1) - delay 1 secs
(Id:7, Time:9) 
(Id:9, Time:1) 
(Id:8, Time:114) 
RECV Leave message      from 10.0.0.200      to 224.0.0.2
Got leave message from 10.0.0.200 to 239.2.16.5. Starting last member detection.
The found if for 10.0.0.200 was not downstream. Ignoring leave request.
RECV Membership query   from 10.10.0.1       to 239.2.16.5
RECV V3 member report   from 10.10.0.57      to 224.0.0.22
Got leave message from 10.10.0.57 to 239.2.16.5. Starting last member detection.
Interface id 1 is in group $d
SENT Membership query   from 10.10.0.1       to 239.2.16.5
Sent membership query from 10.10.0.1 to 239.2.16.5. Delay: 10
Created timeout 10 (#2) - delay 0 secs
(Id:7, Time:9) 
(Id:9, Time:1) 
(Id:10, Time:0) 
(Id:8, Time:114) 
RECV Membership query   from 10.10.0.1       to 239.2.16.5
The IGMP message was local multicast. Ignoring.
RECV V2 member report   from 10.10.0.143     to 233.89.188.1
Should insert group 233.89.188.1 (from: 10.10.0.143) to route table. Vif Ix : 1
Updated route entry for 233.89.188.1 on VIF #1

Current routing table (Insert Route):
-----------------------------------------------------
#0: Dst: 233.89.188.1, Age:2, St: I, OutVifs: 0x00000002
#1: Dst: 224.0.2.3, Age:2, St: I, OutVifs: 0x00000002
#2: Src0: 213.33.32.33, Dst: 239.2.16.5, Age:2, St: A, OutVifs: 0x00000002
#3: Dst: 239.254.127.63, Age:2, St: I, OutVifs: 0x00000002
#4: Src0: 10.10.0.49, Dst: 224.0.1.187, Age:1, St: A, OutVifs: 0x00000002
-----------------------------------------------------
RECV V2 member report   from 10.10.0.142     to 239.254.127.63
Should insert group 239.254.127.63 (from: 10.10.0.142) to route table. Vif Ix : 1
Updated route entry for 239.254.127.63 on VIF #1

Current routing table (Insert Route):
-----------------------------------------------------
#0: Dst: 233.89.188.1, Age:2, St: I, OutVifs: 0x00000002
#1: Dst: 224.0.2.3, Age:2, St: I, OutVifs: 0x00000002
#2: Src0: 213.33.32.33, Dst: 239.2.16.5, Age:2, St: A, OutVifs: 0x00000002
#3: Dst: 239.254.127.63, Age:2, St: I, OutVifs: 0x00000002
#4: Src0: 10.10.0.49, Dst: 224.0.1.187, Age:1, St: A, OutVifs: 0x00000002
-----------------------------------------------------
RECV V2 member report   from 10.10.0.49      to 224.0.1.187
Should insert group 224.0.1.187 (from: 10.10.0.49) to route table. Vif Ix : 1
Updated route entry for 224.0.1.187 on VIF #1
Vif bits : 0x00000002
Setting TTL for Vif 1 to 1
Adding MFC: 10.10.0.49 -> 224.0.1.187, InpVIf: 0

Current routing table (Insert Route):
-----------------------------------------------------
#0: Dst: 233.89.188.1, Age:2, St: I, OutVifs: 0x00000002
#1: Dst: 224.0.2.3, Age:2, St: I, OutVifs: 0x00000002
#2: Src0: 213.33.32.33, Dst: 239.2.16.5, Age:2, St: A, OutVifs: 0x00000002
#3: Dst: 239.254.127.63, Age:2, St: I, OutVifs: 0x00000002
#4: Src0: 10.10.0.49, Dst: 224.0.1.187, Age:1, St: A, OutVifs: 0x00000002
-----------------------------------------------------
RECV V2 member report   from 10.10.0.1       to 224.0.0.2
The IGMP message was from myself. Ignoring.
^Cselect() failure; Errno(4): Interrupted system call
Got a interrupt signal. Exiting.
clean handler called
Removing route entry for 233.89.188.1
Leaving group 233.89.188.1 upstream on IF address 10.0.0.200
leaveMcGroup: 233.89.188.1 on em0
Removing route entry for 224.0.2.3
Leaving group 224.0.2.3 upstream on IF address 10.0.0.200
leaveMcGroup: 224.0.2.3 on em0
Removing route entry for 239.2.16.5
Vif bits : 0x00000002
Setting TTL for Vif 1 to 1
Removing MFC: 213.33.32.33 -> 239.2.16.5, InpVIf: 0
Leaving group 239.2.16.5 upstream on IF address 10.0.0.200
leaveMcGroup: 239.2.16.5 on em0
MRT_DROP_MEMBERSHIP failed; Errno(49): Can't assign requested address
Removing route entry for 239.254.127.63
Leaving group 239.254.127.63 upstream on IF address 10.0.0.200
leaveMcGroup: 239.254.127.63 on em0
Removing route entry for 224.0.1.187
Vif bits : 0x00000002
Setting TTL for Vif 1 to 1
Removing MFC: 10.10.0.49 -> 224.0.1.187, InpVIf: 0
Leaving group 224.0.1.187 upstream on IF address 10.0.0.200
leaveMcGroup: 224.0.1.187 on em0
All routes removed. Routing table is empty.
Shutdown complete....

Habe jetzt testweise einige Netze bei Upstream hinzugefügt, kann natürlich leicht sein, das es falsche/zu viele sind.
Kann es an dem Threshold liegen?

LG

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Moderatoren: andifrm1912enjoyherby68benderrwhomegeko
Ladezeit der Seite: 0.431 Sekunden
Powered by Kunena Forum